Website Nampak
Nampak is Africa’s leading diversified packaging manufacturer, and has been listed on the JSE Limited (Johannesburg Stock Exchange) for 47 years. Nampak operates from 28 sites in South Africa, contributing approximately 49% to trading profit, 13 sites in the rest of Africa, contributing 52% to trading profit, as well as 10 sites in the United Kingdom, contributing 5% to trading profit.
In our drive to maintain our leadership position through quality service, applications are required from suitably qualified applicants for the following positions below:
Job Title: Electrician
Company: Nampak
Location: Nigeria
Requirements
- HND/OND in Electronics / Electrical Engineering
- Must have knowledge of VSD, PLC and Motor Controller programming will be an advantage with knowledge of PLC Logic and Automated Control System
- 3-5 years working experience in Industrial Electronics and / or power distribution and Control system.
Job Title: Tool Room Mechanical Technician
Company: Nampak
Location: Nigeria
Requirements
- Must have GCE O’ Level Certificate
- Must have Certificates in Mechanical Engineering Craft Practice Parts 1 & 2
- Must have Certificate in City & Guilds Technician Part 2 in Mechanical Engineering or OND in Mechanical Engineering.
- Have strong personalities, responsible and disciplined
- Should be able to use Precision Measuring Equipment and other Production Workshop Machines
- Must have at least 5 years working experience with ability to operate Cylindrical Grinding, Milling & Lathe Machines with minimum supervision.
Job Title: Printing Maintenance Technician
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical).
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level
- City & Guilds Certificate (FTC)
- OND/HND in Mechanical Engineering
- Must have at least 5 years Standard Manufacturing experience specifically in Maintenance of Printing Lines
- Must possess excellent Technical Analytical Skills in Mechanical
- Must have experience in preventive Maintenance using necessary Checklists
- Must be hardworking, honest, dedicated, Self-confident, Self-starter and committed
- Be prepared to work in 2 or 3 Shifts (12 or 8 hours respectively) at any time of the week based on the demands of the job.
Job Title: Forklift Driver
Company: Nampak
Location: Nigeria
Requirements
- Must possess all of the listed Certificates: National Drivers’ License and at least a Primary School Leaving Certificate
- Must demonstrate high driving skills especially in the driving of a Forklift
- Must be hardworking, dedicated, committed with high level of vigilance
- Must be able to observe and comply with the Quality, Environment, Health & Safety procedures
- At least 5 years experience in a Manufacturing Organization.
Job Title: CAN/ENDS Making Quality Assurance Inspector
Company: Nampak
Location: Nigeria
Requirements
- Must have HND in Mechanical or Chemical Engineering with at least 4 years experience in high speed manufacturing environment where safety and quality are essential priorities
- Must know how to use basic quality measurement equipment and good laboratory practices
- The age of the Applicants should be between 28 to 35 years, must be matured, analytical and honest
- Must be computer literate, hardworking and willing to work under pressure in addition to being a Team Leader
- Be prepared to work in 2 or 3 Shifts (12 or 8 hours respectively) at any time of the week based on the demands of the job
- Have strong personalities, responsible and disciplined
- Must possess ability in personal organization with minimum supervision.
Job Title: Raw Materials & Finished Goods Officer
Company: Nampak
Location: Nigeria
Requirements
- Possession of an OND/HND in Inventory Management
- Must have at least 5 years Standard Manufacturing experience specifically in Can & Ends
- Must possess excellent Analytical Skills
- Must be extremely precise in Record Keeping and Data Entry
- Must have knowledge of Material Resource Planning and Scheduling
- Must have good Interpersonal & Communication Skills with possession of high level of self-discipline while being able to work without supervision
- Must have knowledge of good Housekeeping skills, hygiene and development of Standard Operating Procedures.
Job Title: Slitter Operator
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical)
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level.
- City & Guilds Certificate (FTC)
- OND/HND in Mechanical/Electrical Engineering
- Must have at least 5 years Standard Manufacturing experience specifically in Can & Ends
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely & efficiently operate the Slitting Machine(s) to full capacity while supplying/feeding the Body Maker with sufficient Body Blanks for 100% Plant Efficiency, be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures.
Job Title: Scroll Shear Operator
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical)
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level
- City & Guilds Certificate (FTC)
- OND/HND in Mechanical/Electrical Engineering
- Must have at least 5 years Standard Manufacturing experience specifically in Can & Ends
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely & efficiently operate the Scroll Shear to full capacity while carrying out continuous visual quality inspection as well as performing all related Mechanical Quality Checks as required on the End Strips, be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures.
Job Title: End Making Press Operator
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical)
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level
- City & Guilds Certificate (FTC)
- OND/HND in Mechanical/Electrical Engineering
- Must have at least 5 years Standard Manufacturing experience specifically in End Presses
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely & efficiently operate the End Press to full capacity to supply the Can Lines including the Customers with sufficient Can Ends for 100% Plant efficiency, be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures.
Job Title: Palletizer Operator
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical).
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level.
- City & Guilds Certificate (FTC)
- OND/HND in Mechanical/Electrical Engineering
- Must have at least 5 years Standard Manufacturing experience specifically in Can & Ends
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely & efficiently palletize Cans onto Pallets for dispatch to the Customers, be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures.
Job Title: End Liner & Curing Oven Operator
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical).
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level
- City & Guilds Certificate (FTC).
- OND/HND in Mechanical/Electrical Engineering
- Must have at least 5 years Standard Manufacturing experience specifically in Food Grade Can Factory
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely & efficiently operate the Liner and Curing Oven to full capacity while carrying out continuous visual quality inspection as well as performing all related Mechanical Quality Checks as required
- Must be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures.
Job Title: Can O’ Mat Operator
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical)
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level
- City & Guilds Certificate (FTC).
- OND/HND in Mechanical/Electrical Engineering.
- Must have at least 5 years Standard Manufacturing experience specifically in Can & Ends
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely operate and load Ends into the Can O’ Mat to full capacity while carrying out continuous visual quality inspection as well as performing all Mechanical Double Seam related Quality Checks as required
- Must be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures.
Job Title: Can Plant Fitter/Technician
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical).
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level.
- City & Guilds Certificate (FTC)
- OND/HND in Mechanical/Electrical Engineering
- Must have at least 5 years Standard Manufacturing experience specifically in repairs of all Equipment with ability to carry out all assigned Mechanical Projects
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely & efficiently carry out repairs on any/all Equipment located in the Factory, be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures.
Job Title: Body Maker Operator (3-Piece Can Maker/Technician)
Company: Nampak
Location: Nigeria
Requirements
- Possession of any/all of the under listed Certificates:
- Federal Craft Certificate (WAEC Technical).
- Trade Tests I, II & III (Mechanical/Electrical)
- GCE O’ Level
- City & Guilds Certificate (FTC).
- OND/HND in Mechanical/Electrical Engineering.
- Must have at least 5 years Standard Manufacturing experience specifically in Can & Ends
- Must possess excellent Technical Analytical Skills in Mechanical/Electrical
- Must demonstrate ability to safely operate the Body Maker to full capacity, be a Team Leader & Player as well as having knowledge of hygiene and development of Standard Operating Procedures
METHOD OF APPLICATION
ALL Interested and qualified candidates should send their Application Letters and CV to: [email protected] using the Job Title as the subject of the mail
To apply for this job email your details to Nampaknigeriamail@nampak.com
